![]() These USB sticks are also very useful as bootable recovery systems, when your main hard drive fails to boot. While this kind of a setup is probably not the perfect choice for production systems, it’s a great strategy for software developers, testers, and system integrators who need to run through certain test procedures quickly and painlessly without having to swap hard drives. The next best choice would be a USB 3.0 external drive, ideally SSD if you plan to run several VMs on it. SanDisk Ultra is a fast stick at a very low price. Some sticks are good for copying large files and achieve really fast speeds however, with many sticks we found random access speeds to be horrible. We found that some USB sticks are much faster than others. Generally it works very well but only with the right hardware. Naturally, the BIOS has to support booting from USB, otherwise the stick won’t boot, but most modern motherboards today support USB boot. This will automatically give preference to the USB stick if it is plugged in. Inside the BIOS change the boot order to try to boot from USB first, before the usual boot device. Now the USB stick is ready to boot Hyper-V Server but you need to tell the BIOS that you want to boot from USB.ĭuring the Power On Self Test procedure when the computer boots, most BIOS developers use some F-key or ESC or DEL as a signal that you want to enter the BIOS. Boot Settings to Run Hyper-V Server from a USB Stick ![]() Once booted, the Windows installation will finish as usual and ask for a admin password. The change is necessary to configure Hyper-V Server to boot from USB and load the drivers at boot time. Then go back to the node ‘testttt’ and select unload hive from the main menu. Then open the newly created node ‘testttt’ and navigate to ControlSet001 then Control and set BootConfigFlags to 1c as shown above. The registry editor will then ask for a name for a new key to load the hive to. Then navigate to the stick’s file system and select the file X:\Windows\System32\Config\System, where X: is the example drive letter of the USB stick or drive you are using. From the main menu click File and Load Hive. You need to open the Registry Editor and click on “HKEY_LOCAL_MACHINE”. If you use the Hyper-V Server 2019 (or older versions), there is one additional step necessary after finishing the Rufus installation process. Preparing the USB Stick to Boot Hyper-V Server 2019 from USB 3.0 If you don’t see that option you are not running Rufus on Windows 8.1 or later or the ISO is not the correct one.Ĭlick start and let it do its magic. Select the USB stick and the ISO image file you downloaded. Rufus, download from our mirror or from their website.A USB 3.0 external hard drive might be a better choice if you need a lot of space and want to also run several VMs. ![]() SanDisk Ultra 64GB costs less than $20 and works really well. A USB stick or hard drive, ideally USB 3.0.The ISO files of Hyper-V Server 2019 or 2016 or 2012 downloaded from Microsoft’s Evaluation center or from here.A computer running Windows 8.1 or Windows Server 2012 or later.One such device is SanDisk Ultra 64GB and larger, with a USB 3.0 connection. The most important thing is you need a fast USB 3.0 stick that offers fast random access speeds and high throughput at a good price. ![]() Setting up a Hyper-V Server 2019 or Hyper-V Server 2016 to boot and run from a USB stick is actually easy to accomplish with the steps shown below. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |